Separate names with a comma.
As mentioned above it's micro blistering and is common where water or moisture eventually rises to the surface of the paint and then often...
Demon Tweeks sells the correct hose. I purchased some last year for the same job.
I have the same plastic welding gun as above and I have repaired quite a number of fairings etc using this tool. It works very well and has...
I used an old scooter panel to repair fairings in the past as long as the same type pf plastic is used you should not have any problems.
If that's original that's a good low mileage, my LC has done 13,000 miles from new and looking at LC forums etc. that seems to be on the lower...
Still a popular bike although many go for the RD400. I have a 250LC which I do ride in the better weather, it's now classed as a historic...
The price of Yamaha parts for these older models has been high for a while now and prices are rising. You might want to join the RD LC Crazy...
From experience of using them on a Yamaha, they can be a bit sketchy, particularly the head gasket material. As you are working on a Ducati I...
Dave Courtney - a "celebrity" gangster apparently found dead through suicide, a bit strange!! It seems he was suffering quite badly from cancer...
I have a new 998 frame in my workshop that was originally going to be used for a bike to be run at the TT. It came straight from Ducati and has...
I have a YSS shock on my RD 250LC Yamaha as do a lot of owners of these models. I have no complaints and it worked perfectly straight out of the...
it could be a sticky fuel pump, I have had various issues with fuel pumps when my bike has been standing for a while but it will usually pump or...
I saw your bike on the LC forum, it seems to be very popular on there too.
One of the features of using a quick change sprocket carrier is that they normally have a small lip to retain the cush drive rubbers. This...
Are you on the RD LC crazy forum? I think they would like to see your efforts if you are not. Especially as it's a hybrid. I have Jim Lomas...
It was a long time ago (2009) and I got them from eBay, they are very good though and were only something like £60 at the time which was very...
I'd agree that 998 hoses are different and I am pretty certain you will have fitment problems. I would keep searching, I got a cheap set for my...
I have a quick change carrier and use Talon sprockets but I don't do many miles per year and the rear sprockets are alloy. They do make steel...
I use DID, but it is purely personal preference, I had a British make bike chain on my TZ250 when I Used to race and it came with the bike and it...
I have one on my 998 and you really need to have the instructions that go with the cap if you want to use your own petrol cap as the original cap...