Main bolts (13) torque is 45 Nm ± 5%. Smear screws (10) with specified grease. Refit the upper U-bolt (11) and insert the screws (10). Tighten screws (10) to a torque of 25 Nm ± 5%, following a 1-2-3-4-3 sequence, as shown. Edit: Sorry pics haven't uploaded up, I did a copy and paste but they haven't shown on the thread? Bolts 13 are the 2 x main bolt securing the clamp to the top yoke and the 4 x screws are the ones that secure the top cover to the clamps if that makes sense. Just realised the thread will accept a pdf.