Range Rover Sport HSE - Vehicle was absolutely riddled with deep wash marring ( Hand Car Wash ) and random deep scratches ....( Metallic fleck in paint was totally obscured due to amount of surface defects - after machine correction the metallic fleck is once again visable and ' pops '. ). Full clinical safe wash ( 4 buckets with double gritguards in each ) Citrus pre-wash followed by Bilt Hamber Auto foam to remove as much dirt as possible prior to contact wash. Gyeon Bathe Essence vehicle shampoo. All intricate / tight areas cleaned with a Swissvax detailing brush. Dooka Osha wash pad for paintwork and Microfibre madness mitt for lower parts of vehicle / Arches cleansed - tyres degreased - Iron remover to wheels then wheels coated - Full chemical ( Tar & Iron ) decontamination & physical decontamination to remove any remaining bonded contaminants with Tac Systems clay-cloth. Vehicle air blown dry including all gaps. Spies Hecker 7010 wipedown prior to machine correction to give true representation of paintwork & to give me an idea as to how bad it really was. ( All Rupes Bigfoot machines and Rupes pads used & Fantastic Sonax Perfect Finish ), Various light source's via Scangrip. Finally Gyeon Ceramic coating allowed to cure overnight then an application of Gyeon Cure to protect underlying ceramic / promote curing and to give a super-slick finish. All exterior plastics cleansed and restored back to factory with Solution Finish. Tailpipes polished and protected. Interior FULLY detailed back to a factory as new finish.
Appreciate you sharing the process Rob, top job' You should add your website into you're signature for anyone interested bud.
Great rejuvenation, impressed. So, ball parkish, how much is a job like this going to cost the vehicle owner?
Looks like the owner got good value there, hope they keep on top of it now after all that work. Been looking recently at the range of products available for this sort of work and can't believe how sophisticated it is.
The owner was blown away Thank you.....Detailing is just that.....there is a huge range of products available to the consumer and pro alike....its knowing whats good, and how to use them effectively....skill and a methodical approach is also a ' must have pre-requisite ' if you want to go down the route of machine polishing to attain results.....if you need any tips or advice going forward please don't hesitate to send me a PM and i'll endeavour to help you no worries.
TBH buddy....after each long day it was home for food and then bed....was too knackered for beer which is saying something for me!
That looks amazing great job , nice car too, although to me it would look much better covered in mud with a set of general grabbers instead of low profiles on, that’s what Range Rovers are for , well, when they’re not breaking, sadly speaking from personal experience on that one!.
