Quick favour, can someone tell me the spec of the LH lower fairing bolts? Specifically the one in the nose and two underneath. Cheers.
Not sure but you can get them from a dealer for not a lot if you want genuine ones... 39 832.1.030.1A Pin 2 41 775.1.021.1A Screw
I think I have them after taking the bike apart and putting it (mostly) back together, just not sure which ones are intended go back where. M6 16mm and 20mm...
I use stainless button allens under fairing. They dont rust or bond to the brass thread in the wellnuts.
Indeed it is, not mine though. Quite happy with my black 749. Didn't have a picture of the LHS to highlight. To be explicit, is the long bolt for the nose and short for the wellnut underneath, or vice versa? Ta
Change my dzus for button allen lower rear when a dzus came undone. Only dzus I have are sides top 4 where I can see them.
Remember to put grease or Vaseline on the rubber grommet so the metal spigot goes in and comes out more easily
