Is your airbox sandwiched between the head and manifold or is there an insulating piece at the head/carbon interface?
The airbox is sandwiched between the head and the throttle body. There is also a heat insulating layer incorporated into the bottom of the airbox.
You asked what they were made out of, I checked the start of the thread for evidence - then you changed your question, I was trying to be helpful
I asked what the insulating material was between the head and airbox. What question did I change? Are we on the same page?
Post 94 I read 'What's it made of' I checked earlier posts and replied, then the question seems to have changed - probably to be clearer, but I could have dreamt it
Post 92: I asked two questions. 1: Is the airbox sandwiched between the head and the intake manifold. 2. And if so, was there an insulating material between the carbon box and head. Vmotos’ reply was yes to both my questions. (Which is what I assumed) I then asked if the insulating material it was phenolic resin (post 94). You then, in post 95, alluded to the fact that the answer to my questions were mentioned in post 3 and 7. I then alluded to the fact that you were wrong (post 96). One of us is wrong. Would you like to guess who .
You unless I speed read and you didn't change your answer but I was only trying to be helpful either way so sorry for upsetting you
The post was actually changed, the question was previously simply phrased: 'Made of?' 40 points to Gryffindor!
