For sale Top box and mounting kit. fits 1200DVT model - used only handful of times . Thought it would fit my new 1260s - the box does but the brackets don’t . Top box colour is white but these can be replaced to match the bike.
I thought the Ducati top box mounting plate and support arms were the same for the 1200 DVT models (2015-17) and the 1260 models (2018-2020)?
I did but just bought a new bike today and they said the box and plate will fit but the arms won’t cos the bike chassis is different . They offered me a good deal On a full kit as they said the brackets can’t be bought separate.? If anyone knows different let me know cos I ain’t picked it up yet.
Ok so two on that thread said fits ok but not sure if that’s the plate n box which I know do or it’s they got the arms to fit also
I'm an oddity as I don't like the larger Ducati box so I have a Hepco and Becker rack and box. I can also confirm that the rack from the DVT will not fit the 1260 though as the subframe is wider. My easyrack rack for the DVT is still for sale if anyone want to make me an offer... https://www.ducatiforum.co.uk/threads/hepco-becker-easyrack-for-multistrada-dvt.74260/
It could be that the Hepco and Becker rack and support bars for the 1200 DVT won't fit the 1260 whereas the Ducati accessory top box rack and support bars will. I'll find out toward the end of this year when I change my 1200 DVT for a 1260 but it would be good if others could confirm (e.g. @SMG and @Rainman ).
Can’t find anything to say they do fit-parts breakdown doesn’t show it but is not clear as the top box ‘kit’ says it fits both models (and the kit includes the attaching frames) I’ll find out this week as the dealer is fitting and delivering the 1260 so I’ll see if my old stuff is the same. They seemed to be sure it won’t fit mind! Shame they won’t sell just the brackets separate
As a 1260 owner, who has had the top-box and pannier set-up fitted, from new, as I recall, the DVT frame arrangement doesn't fit, whereas, the top-box itself will, using the same top mount. I bought a new top-box assuming that the box from my 1200 (non-DVT) wouldn't fit, but found out afterwards, that it would have!
Thanks that’s wot the dealer said also. I have had to order a new full set up incl top box as they don’t split it out . so back to my original post - for sale 1200 DVT top box and brackets for sale (in white)
I transferred the Ducati top box mounting kit, complete with underneath support rails, directly from my 1200 S DVT to my 2018 1260 S, so can't understand why dealers are saying it doesn't fit, then again a dealer told a mate that the aux lights also couldn't be transferred and yet they can too!!
Thx for the replies I’ll see what happens when I get it this week if mine fit then they can have the new stuff back
I can confirm that the top box fittings from my 2015DVT both Ducati & Ventura fit the 2019 1260 Pikes Peak. All holes line up precisely.
Thx I spoke to the dealer today after ur replies n they now confirmed the kit to be the same part number so it will fit . That saved me a few £££s-
I’m looking for a fitting kit that will work on my 1260, I have the top box and fitting kit from an earlier pre dvt model but that definitely is different although the box is the same if anyone has a kit that would work and they don’t want, let me know
Looking for an OEM fitting bracket for a DVT. Have the top box sitting on a SW Motech plate but it places the box too close to the pillion seat. Wife's complaining.
You could always buy the Ventura kit and put a universal givi plate on the top. I have that set up and it gives the choice of decent room for the pill in or twist it round and it sits over the rear seat for a better sports setup.
Thx Boss man. Looks like an interesting set up. And by "interesting" I mean, it looks ugly as hell. But, feels like it'll do a better job than the SW unit. Might be function over form in this case Will do some proper research on it. Thx!
