Penetrating oil blue tac and gaffa tape bath for snapped bolt on vertical face (I will let you know if it works, only applied this afternoon ).
Tool for removing the castle nuts from cambelt sprockets Alternator rotor holding tool Both for air-cooled 900 monster
definitely after although this was the second version with m8 bolts turned down to fit first version with m6 bolts snapped ……….some previous owner didn't want it to come loose it was that tight the body was rotating free from the top with the thread in ……….but I won lol
.... that looks to have very similar "styling " to my steering head tool ... Ha ! [ first pic in this thread ]
fork compressor I've seen pics of these in other threads in the past weeks , from various members . One looked like a medieval siege weapon , and the other is as ugly as mine .... I mean the tools , not the members .... -
No specialist tools used in the making other than electric drill, hacksaw and files. Silly nut socket Silly nut socket Front stand Rear stand Fork compressor (one handed use) Silly nut socket and pulley holding tool Aluminium swingarm brake plate retaining pin.
You’re going to love this one! My homemade depth gauge for finding top dead centre on my first bike, a fully seized cellar find, NSU quickly. All at the tender age of fifteen.
If it works what the heck, mine was made in about 5 minutes it did it's job and won't be needed now for years to come, not much point in wasting half a day to make a pretty one. Steve
Bingo ! I've just been looking for some scrap to make one of them .... then a distant bell rang .... Here's one I'd made earlier ....... much earlier , then it vanished . It should have been with the spring compressor ( ^^ #31 above )
Does the Airbus engine not need that bolt asking for a frequent flyer, well not so frequent just now.
