996 996bp Seat Cowl

Discussion in '748 / 916 / 996 / 998' started by Ian Tiltman, Apr 13, 2020.

Page 1 of 2
  1. morning all, hope you're all keeping safe and trying to enjoy the easter break
    i've been looking into getting a mono seat unit but seem to be silly money, does anyone know of a rear seat cover/cowl, i've looked and can't find one anywhere, they seem to be made for the newer models but not mine, any help/advice greatly appreciated cheers...ian...
     
    #1 Ian Tiltman, Apr 13, 2020
  2. Thread moved
     
    #2 El Toro, Apr 13, 2020
  3. 60945F98-4D34-4CDA-80BD-3EC5EA268640.jpeg 64E8A145-528D-46AC-B2CF-96BD7D58EA4F.png
    Hiya, I have a mono seat unit available, new. They are silly money but I will happily take a good offer. Ducati don’t make a cover for the rear seat unit.
     
    #3 JoeC, Apr 13, 2020
  4. #4 Exige, Apr 13, 2020
    • Useful Useful x 2
  5. #5 JoeC, Apr 13, 2020
    • Like Like x 1
  6. that looks the nuts but it's going to be way out of my price range, thanks though
     
    #6 Ian Tiltman, Apr 13, 2020
  7. I have one on my BIP - that's why I knew o_O
     
    #7 Exige, Apr 13, 2020
    • Like Like x 1
  8. Bip?
    Thought you were an R man..
     
    #8 deleteduser211220, Apr 13, 2020
  9. First Ducati I bought was a blingged up from new 998 BIP.
     
    #9 Exige, Apr 13, 2020
  10. Soon to be mine for a pittance. :cool:
     
    #10 Expat Jack, Apr 13, 2020
    • Funny Funny x 1
  11. You best be quick, they are still going up :yum
     
    #11 Exige, Apr 13, 2020
    • Thanks Thanks x 1
  12. There's some cracking bike lifts about nowadays.
     
    #12 Birdie, Apr 13, 2020
    • Funny Funny x 2
    • Face Palm Face Palm x 1
  13. #13 Martin Le Tessier, Apr 13, 2020
    • Like Like x 3
  14. Would you have a photo.
     
    #14 Roadtrip, Apr 13, 2020
  15. He doesn't do photos of his bikes..
     
    #15 deleteduser211220, Apr 13, 2020
    • Funny Funny x 1
    • Agree Agree x 1
  16. No, I'm not @Robarano you know o_O
     
    #16 Exige, Apr 13, 2020
    • Agree Agree x 1
  17. You're very very lucky, I found one! :eek:

    IMG_0654.JPG
     
    #17 Exige, Apr 13, 2020
    • Like Like x 1
    • Thanks Thanks x 1
  18. #18 Ian Tiltman, Apr 17, 2020
  19. I bought the hardware so that I can swap seats in a few minutes, including new light s and seat. You don't need to. You can swap over most of the hardware and the tail lights without too much problem. Buy yourself a proper monoposto seat as the Bip seat will look a bit off.
    I can't remember properly but you will need a new aluminium bracket thing and spacers to mak the seat/latch fit to the biposto subframe. There are tutorials around for this. Don't forget to remove the passenger foot rests to complete the look.
     
    #19 Martin Le Tessier, Apr 20, 2020
  20. If i remember correctly you only need to put spacers under the latch part because these two bolt holes are closer to the top as there is no seat pad bracket 1.JPG
     
    #20 Martin Le Tessier, Apr 20, 2020
(You must log in or sign up to post here.)
Page 1 of 2
Do Not Sell My Personal Information