748 Clutch Lever Plunger Thingy

Discussion in '748 / 916 / 996 / 998' started by NeilH, May 28, 2020.

  1. Sorry not sure how to describe these parts!
    The round threaded pin (barrel) that goes into the hole in the clutch lever and the plunger rod that screws in to the pin (retains the pin and activates the clutch). Is it possible to buy these separately?
    I've changed my levers and it was really hard to unscrew the plunger from the barrel - jut about managed but would be good to replace if they are available.
    Thanks
    Neil
    :)
     
    #1 NeilH, May 28, 2020
    Last edited: May 28, 2020
    • Funny Funny x 1
  2. #2 Martin Le Tessier, May 28, 2020
    • Like Like x 2
    • Useful Useful x 1
  3. That's the one! Do I need to phone Moto Rapido?
    Thanks
    Neil
    :)
     
    #3 NeilH, May 28, 2020
  4. I had exactly the same problem, they are a bastard to get out!!:mad::upyeah:
     
    #4 WAYNE, May 28, 2020
    • Agree Agree x 1
  5. Most levers have a tiny grub-screw that locks the pin into the pivot. Has yours? Did you loosen it before unscrewing the pin?
     
    #5 razz, May 28, 2020
    • Thanks Thanks x 1
  6. I will have a look - that might explain the problem......:confused:
    Thanks
     
    #6 NeilH, May 28, 2020
  7. grub screw removed - much easier to unscrew plunger (thread looks okay)!
    Thanks :)
     
    #7 NeilH, May 28, 2020
  8. Yes the dreaded grub screw, great idea but sometimes they are hiding just waiting to piss you off!!:mad::):upyeah:
     
    #8 WAYNE, May 28, 2020
    • Agree Agree x 1
(You must log in or sign up to post here.)
Do Not Sell My Personal Information