I want to fit my Givi V56 top box to my 1260 Multi Is there a Givi or SWMotech rack available or is there only a Ducati part? Givi website only appears to show fixings for pannier boxes.
SW Motech ALU plate then adaptor for the givi, either monolock or monokey, job jobbed, links to follow
https://www.ebay.co.uk/itm/SW-Motec...848383&hash=item23d1880453:g:O5cAAOSwZEde1M6c https://www.ebay.co.uk/itm/SW-Motec...219349?hash=item1cc2ea4d15:g:fcIAAOSwF5Vb4~Fx
I think you have to buy the Ducati plate as individual items unless you buy it with a genuine top box.
I do have an sw mote has plate and givi adapter that I used on my 1200dvt with an outback trekker if anyone is interested?
I cant quite remember, maybe complete rubbish, Ducati do not or will not sell the related hardware that has the standard givi/kappa monokey fitment, unless you purchase the Ducati top case which is manufactured by givi.
I believe that's correct, but know for certain that if you were to get an OE case without a plate you could use a Monokey one.
You can buy every part you need from the dealer, just ask for all the parts expect the top box.....thats what I said to my dealer, it comes to about £250
Whatever hardware you use make sure that you have the side stays. My mate with an Enduro has a Touratech setup without these, might be Givi parts, and the original grab rail is under stress and has split at the back.
As others have said I also just purchased the individual parts. The lower supports conflict with the touratech cross brace. I made a couple of supports from flat bar mounted from the Givi plate to the cross brace mounts. 3 years on no problems apart from reprinting the supports and cross brace.
When I got my Multi with topbox already on it was slightly too far forward for serious pillion trips and also quite flimsy. I made a 6mm ali plate to mount on the back and bought the Ventura struts from under the tail section to stiffen the whole plot up. Has worked a treat.
