Bit more metal work .. added a sidestand bracket that was missing on the next CR build - off for coating next Started the service on the 125 , found it was missing ball bearings in the stem , replaced them and serviced the forks Pulled the tyres off to replace with something road legal, only to find cracked and buckled rims. Unexpected delay , but stripped the hubs and spokes out. with a little heat and aluminium rod they’re ready for coating on Monday - now I guess I’ll have to do the hubs and plate the spokes .. bah Caliper kit for the old CBR arrived , but was I complete and had 2 wrong pistons .. bah again. So I painted the calipers and baked them in my iddy biddy oven ..
The wife said today "Ron, if you're bored, why not make a bird table?" Now she's kicking off because I put her ninth
I'd a soil tester on site yesterday before the structural engineers can make their calculations for the retaining walls,but i'd to drop off the samples in the afternoon as they're not going in that direction (christ knows what the cost is going to be for the test?),this morning i've been on bike to the coast.....very light on traffic.
@Ackers - what ECU did you do this on? I'm going down the diagnostics route since my today-diagnosed MAP-sensor EML on. I'm think mine is the Siemens M3C or D even though it's got Magnetti-Marelli marked on it...
Went on a trials riding course advanced this time, which me the lad and I are actually improving. Absolutely battered now though.
We went out for our first ride with the Sena intercom, quite impressed. We went for the SF2, very clear and easy to hold a conversation. Just waiting to get the multimedia module fitted now.
