**SOLD** I am selling my Ducati 748 track bike. I bought it 3 years ago and have only managed 3 track days on it. I just don't get the time to use it. The previous owner converted it from a road bike to a track bike to use to compete in Darley moor pre-98 injection sound of thunder and newcomers classes. After the last track day i decided to change the belts and do valve clearances. I found a few rocker arms had the chrome coming of them. One was bad enough that it had damaged the cam. I replaced the rocker arms that had ware and replaced the cam with a good used one. With it being a race bike some i replaced some parts that had been previously damaged. One of the handle bars, throttle tube, front master cylinder, nose cone and rear sets were replaced to freshen the bike up. While i was doing that work i decided to make a alloy header tank and front sub frame. The bike has the following parts: Fibreglass track fairing (containing belly pan) Dzus fasteners Alloy header tank Alloy front subframe Powder coated frame and swingarm Quick shifter Detachable wire locked key Cam belts replaced with exact fit items Power commander 3 USB Remapped by "melted sliders", swadlincote Remus carbon silencers (slight damage) New rear hub bearings Titanium hub bolts Lock wired bolts Foam air filters Kill switch tether Alloy fuel sender nut Ducati performance pressure plate Showa forks and rear shock Brembo 19x20 rcs radial brake master cylinder Wavy front disc rotors Sintered HH front brake pads Rear brake master cylinder rebuilt with brembo service kit Renthal grips Recently new set (f&r) of diablo Corsa tyres Brake lever guard Wets on wheels Separate front brake pads for wet wheels R6 regulator rectifier wired under seat New single phase generator Flywheel removed Keyless fuel filter cap New lithium ion battery 12v rain light on handle bar switch Quick action throttle New throttle cable Big bore clutch slave cylinder Spare clutch plates (friction and steel) Ses clip-ons New crank position sensor Charge indicator Spare sprockets Gearbox protector around front sprocket� Recent new 520 chain New double-bubble screen Adjustable rearsets Hobb Sprt tyre warmers ( front damaged) Most of original fairing included, headlight, ecu, rearsets, screen, controls and various spares 1 kW 240v ac Generator for powering tyre warmers front paddock stand Spare Brembo RCS (needs rebuild) V5, no MOT, SORN I had considered converting this back to a road bike so i could use it but i have another couple of projects taking up my time just now. The bike over all is in good mechanical condition but i will say that the bike has scuffs and scratches on some of the paint of the panels and frame. The bike rode really well anytime i managed to get out and ride it. I'm looking for £3500 ono. The bike is located in Dumfries Scotland.
I had previously looked at doing an engine swap on the bike. I just don't have the time to spare to do it. Would make a good project for someone to convert.
Yes the bikes still for sale. I unfortunately have no way of transporting the bike. I sold my van a few years ago. That is one of the reasons I haven't been using the bike.
