1200 DVT Sprocket Nuts

Discussion in 'Multistrada' started by NSR500, Dec 11, 2020.

  1. Guys, what size are the sprocket nuts? Are they M10 x 1.0?
     
    #1 NSR500, Dec 11, 2020
  2. If you don't get a sensible answer to your enquiry, you can use sprocket wire.

    The beauty of this method is that you can use either metric, or Imperial

    Sprocket wire.JPG
     
    #2 Borgo Panigale, Dec 11, 2020
    • Funny Funny x 4
    • Useful Useful x 1
  3. They are indeed, see item 4 below. From Ducati of Omaha website parts catalog. upload_2020-12-11_12-0-29.png
     
    #3 Robert Stewart, Dec 11, 2020
    • Like Like x 1
    • Useful Useful x 1
  4. Oh dear, some people.....o_O
     
    #4 NSR500, Dec 11, 2020
    • Like Like x 1
  5. Ride by Wire?? :)
     
    #5 Veetwin, Dec 11, 2020
    • Funny Funny x 3
  6. I would check the steel grade marking on the head, should be at least 8.8.
    10.9 or 12.9 grade preferably. Whatever you do, don’t use stainless steel.
    Otherwise these may shear off.
    Torque setting chart attached. These settings are with a dry thread.

    upload_2020-12-12_12-2-51.jpeg
     
    #6 hypermotbloke, Dec 12, 2020
    Last edited: Dec 12, 2020
  7. Yup. Know all about torque, been an engineer in aerospace all my days! Just needed to know the thread size to buy drilled nuts.
     
    #7 NSR500, Dec 12, 2020
(You must log in or sign up to post here.)
Do Not Sell My Personal Information