It's a bit like experimental curry night, but then you resort back to your regular tried & tested plateful the following week.
You’d want to have thick skin just to build that and then post about it, it looks like a tarts boudoir, sorry OP not my cup of tea. I mean why fit a full titanium Akra exhaust then cover the titanium with sticky gold tape ? I suspect the OP just posted it on here to see if there’s any interest in buying it. You might find someone out there who wants it but I reckon you’d be better off putting it back to stock and selling off the bits out that’s going to be an expensive lesson methinks.
that's a level of absolute tat normally reserved for an old gsxr600! fake carbon side stand , heat reflective tape on the exhaust , fake carbon screen! that poor bike tell you what though.. if you can prove it weighs 170kg and does 210bhp at the wheel on an independent dyno i'll give you double your asking price. no questions asked.
Ok....so it looks like a aprilia rsv4r It is also a re-build project lovingly put together by yet another enthusiast that loves ducati! I for one don’t care and like to see all manner of custom build! Buy another and this time don’t hold back! Let your inner Picasso go and see if you can truly wind this lot up!
if I was looking at this bike for a friend, then I would be asking if its 2 bikes made into one, or a rebuilt track bike. The mix of 1199 motor, 1299 fairing, standard wheels and rear suspension, and Ohlins forks, 1199r swingarm pivot, and mudguard cut outs for the DDA+ acquisition kit leaves too many questions to buy in confidence.. and the painted / anodised materials could just be covering up crash damage.. might be a great bike for someone though..