Yet Another 900ss Butchered

The case had already had a repair so I took it to MCS engineering to check it out.
They tidied up the repair a bit and said it should be good to go. I guess I'll find out for sure when I get it running.

 

The swinging arm was fitted this afternoon. I might be worrying over nothing, but the front sprocket is fouling the swinging arm in some positions. New standard 15 tooth sprocket has been fitted to replace the 14 that was on the bike when I got it. I put the old one back on and that's fine. I was wondering if anyone else has noticed this before.

 

Thanks again Keith. I hope you're right.

 

The best part of any project.....Bolting shiny bits back together.

 

I've had a couple of days holiday this week, so got most of the wiring sorted.
After a lot of thought decided to order an Exact Start cable upgrade.

 

No Mate.....That's for the weekend.

 

Wheels sorted.

 

After testing positive for covid I haven't felt like doing much, although a couple of hours were spent in the shed this morning.
The owners had their hearts set on an Ohlins rear shock, but can't seem to get hold of one.

 

The body work is away being done. The sprayer called over at the weekend to work out where to spray the graphics

 

Thanks for the link. I sent them an email last week to see if they had the shock in stock, but didn't get a reply.
About a month ago I ordered one from HPS after being told that Ohlins had 2 in stock in Germany.
I contacted them after 3 weeks to see where the shock had got to, and was told there had been a mistake. Ohlins didn't have any in stock, and won't be making any more until September.

 

Hi Grant. MCS in Brightlingsea fabricated the tank and side panels.

 

I suggested the Maxton to the owners, but they had their hearts set on the Ohlins.
Managed to find one in the States, so that should be here in the next few weeks.

 

This is the 10th tank that Lee's made for me.
Here's a few pics.