996 Sps Samco Sport Silicone Hose Kit

Discussion in '748 / 916 / 996 / 998' started by Paul55, Apr 16, 2022.

  1. Just working through a growing list of "things that might be replaced" and wondered about replacing the 22 year old hoses and clips.

    Originals work fine, but how long do these things last?

    Many thanks, Paul.

    0883529F-BFAB-47C9-A4B1-8E4ECA9F9A50_1_105_c.jpeg
     
    • Like Like x 1
  2. For ever :cool:
     
    • Like Like x 1
  3. They do last a long time but I replaced mine with black samcos
     
    • Thanks Thanks x 1
  4. Black best on road bike for sure.
    Blue great on track bike.
    Red just wrong.
    Apparently you can also get Cammo ones now. :cold_sweat:
     
    • Like Like x 1
    • Funny Funny x 1
  5. Thanks Jack, I wouldn't want to cross any boundaries of good taste, heavens forbid.......:p
     
    • Funny Funny x 3
    • Like Like x 1
    • Agree Agree x 1
  6. Gixxer people do :p
     
    • Funny Funny x 2
    • Agree Agree x 2
    • WTF WTF x 1
  7. You could always just buy a set of s/steel jubilee clips from Samco and replace the original (now tarnished ones).

    It looks like the LH crankcase cover needs a bit of tlc too though , a standard Ducati feature though on a bike of that vintage. Paint stripper, 800 grit wet/dry paper, steel wool, zinc phosphate engine paint and Simoniz clear, petrol resistant, lacquer will have that looking as new :upyeah:.
    D95AFFAD-2C26-4F7F-BC9F-9757FF23EEF5.jpeg 500AC2C2-1EDE-4B2C-9EA6-D1A691FBDEE7.jpeg
     
    • Like Like x 3
  8. I hear you Paul.

    I bought this "blind" at auction last year at a very cheeky price, so I know I have to "invest" to get her up to scratch. All the things that rot, fluids, belts, pads, tyres, discs, suspension have been renewed and checked.

    I deserve some road time now.

    Eventually that engine will come out and get the treatment you describe....
     
    • Like Like x 1
  9. BTW, one thing I have failed to cure is a persistent, but very slow oil leak from the front rocker inspection cover. It was removed recently to check clearances, so is it a case of remove again and re-do the gasket seal?
     
    • Agree Agree x 1
  10. FWIW- noted mechanic on this side of the pond, LT Snyder, recommends replacing hoses every 10 years and strictly using non-perforated hose clamps when upgrading to silicon Samcos.

    Apparently traditional clamps damage the outer surface of the hose?
     
    • Useful Useful x 2
  11. Personal next upgrade would be a 848/1098 kick stand.
     
  12. I can see the logic in this, just in case. After all no one would want a hose to split whilst riding and be left at the side of the road.
     
  13. Find as3 hoses. 3rd of the price of samco and just as good.
     
    • Like Like x 2
  14. AS3 pipes, full factory colour not to everyone’s liking. Marine grade stainless clamps. A18F4C32-3D9D-4464-A914-E4969243EB44.jpeg
     
    • Like Like x 6
  15. I had a set of non Samco silicone hoses for well over ten years now. No problems at all. I still have the 27 year old original hoses in a box. I'd use them again if I had to, still nice and supple.
     
    • Like Like x 1
  16. Oh no, now I feel ashamed of my shabby lump.....:worried:
     
Do Not Sell My Personal Information