Kill switch that may be suitable? https://www.ebay.co.uk/itm/183467149692 Make a bracket for the reservoir - try not to drill and tap any existing parts if you can. I attached mine using existing fixing points. 1098
I ordered one of these BSD units. Yes Ricky, I won't be doing anything to any oem parts. (Clip on excluded as I have a spare) Im taking a punt on this for reservoir clamp as its only 5.99. I could bolt the bds to that to make it neater, dunno we'll see. But I think i can position this to re-use oem reservoir bracket.
These clamps are a result for only £5.99. I have my reservoir where it was oem now, so no fairing clash. They're 10mm wide, so nice and narrow. Only caveat is you need a longer hose. 10mm OD x 6mm ID and 150mm long. OEM is 100mm. Typical. BSD arrives tomorrow.
OK. OK. I will say it. Great setup. Brembo. BSD. Ruined with Lego block clamps from god knows where. Make a bracket yourself or if you want to buy, get something better. Kelfab springs to mind. https://kelfab.co.uk/ Honestly just trying to help.
Nah. Its practical. Its not a show pony. It’ll do. Money can be better spent. Its to be a road/track bike. I like working bikes.
I just spend loads on m/c and bsd. A nicer one can come along once Ive fully sorted the track day setup. Oh and made more mistakes. This is part of the fun. Ive to replace a slightly melted lower panel I got as a bodykit cheap on fleabay and to paint that and the tank cover. Its currently in fe trim and its not an fe. Can't have that.
I actually got this, which is very nice. The pic above is the previous model. This is better. https://www.bikesportdevelopments.c...on---brake-pump-mount---stoprun-start-lap-set Despite Jacks objections the 5.99 bracket looks ok as its black and not really noticeable and frankly the kelfab one is not very cool (polite) and would require a new reservoir as its a side mount fixing. The oem is a top mount fixing. Plus there's no obvious rubber mounting on kelfabs I can see. AND I already bought a new reservoir (coz its clean) and Im not buying another one. Ner. I'll firm it all up and photo it at weekend for Jacks and others' disgust.
BSD = nice. Kelfab will do a bracket for side or underneath BTW. Looking forward to seeing the set up. So long as you’re happy that’s all that matters. but you can’t polish a turd
No, but you can roll it in glitter and call it a Lamborghini. anyway, wait till he hears I'm prob just gonna rattle can black the fairing... I'm also fitting a switched 12v via the gps lead for a usb port.
Its all together and road tested in S (soft), which already feels better than oem and oem wasn't bad (not as good as my old 1198 which was immense). The legendary bracket did okay. But I noted BSD do one with white printed part no on it which should sate Jack. So Its to be replaced.
Shout for great service from bikesportsdevelopments, fast service and delivery of high quality merch.
