Great use of Carbon, Ti, Magnesium and a few other bits and pieces

Discussion in 'Ducati General Discussion' started by Carbon749, May 21, 2012.

Page 2 of 3
  1. Hi, I had the casing machined to be "cut a way", then painted the casing satin black, leaving the machined faces satin ally.
     
    #21 Carbon749, May 25, 2012
  2. Looks good... Is the exhaust titanium?

    Got any future plans for the bike? It looks great with the exposed carbon nose cone and single seat unit.
     
    #22 Putney, May 25, 2012
  3. Exhaust is the 57mm system in stainless with extra lambda port, power commander and bespoke engine map done by BST. 124bhp at the back wheel.

    The nose cone and seat unit were bought from Sharpy G, another carbon addict :biggrin: So the credit should really go to him.

    Only thing in the pipe line is a new clutch as my clutch basket is reaching the end of its life, so, guess a nice 6 ball DP slipper may find its way on there.

    Other than a new clutch, No more plans for the bike, think I've reached the point were there is enough bolt on bling .... If not a little too much.
     
    #23 Carbon749, May 25, 2012
  4. Thought the seat and nose cone were very sharpy esq!!

    Have you changed the gearing?

    I have ordered a tank breather kit from Jerry so that's the last thing to do on my bike... Sadly won't be riding this year due to house purchase...
     
    #24 Putney, May 25, 2012
    Last edited: May 25, 2012
  5. Left the rear sprocket as standard, but, running a 14t on the front. To be honest I can't remember if I swapped the front or not. I know my 749s was 15t as standard on the front, and I dropped that to 14t. Quite sure I did the same mod to the 749r as well.

    Did fit a case saver at the same time when the front sprocket and chain were being sorted.
     
    #25 Carbon749, May 25, 2012
  6. Apart from the looks, what's the purpose of the tank breather?
     
    #26 waggytee, May 25, 2012
  7. Be careful......the answers you get maybe more obvious than you think :wink:
     
    #27 XxAnthxX, May 25, 2012
    • Like Like x 1
  8. Bling
     
    #28 Putney, May 25, 2012

  9. Im hoping for around that... I have full 57mm exhaust, RS Bell Mounts and EVR air box....going to get CJS tune up on standard ECU. When funds allow.
     
    #29 Putney, May 26, 2012
  10. Nothing wrong with a bit of bling :upyeah:
     
    #30 waggytee, May 26, 2012
  11. If I'm being completely honest, it was 123.? Can't remember the point something, so I round it up :tongue:
     
    #31 Carbon749, May 26, 2012
  12. Very nice parts and beautiful bike
     
    #32 tm#99, May 27, 2012
  13. I tought I was the only one not using indicators. ;-) looks sweet
     
    #33 RVizela, May 27, 2012

  14. Mine's got 138....(supersport heads)....
     
    #34 RickyX, May 27, 2012
    • Like Like x 2
  15. Stunning bike seen it in the flesh today at Matlock bath.
     
    #35 redhf, May 28, 2012
  16. Show off! ;) @ Rickyx
     
    #36 Putney, May 29, 2012
  17. Aren't we all?? That's why we love Ducati's!! :upyeah:
     
    #37 RickyX, May 29, 2012
  18. howa bjutifool ! :) very, very, very nice job... true class act!

    grtz

    Koen
     
    #38 kope999R, Jun 5, 2012
  19. Hey whassappenin carbonistas ? ;)
     
    #39 Sharpy_G, Jun 25, 2012
  20. @Ricky - mine has a little more : )
     
    #40 JerryXt, Jun 25, 2012
(You must log in or sign up to post here.)
Page 2 of 3
Do Not Sell My Personal Information