All the bolts around the fairings are black other than the screen ones are black, I know it's a total tarts thing but can you get black ones ? I've looked around but can't find them ?
Give it time, and the bugs will do it... On an off subject, aren't those tiny bolts a real pain in the arse!!??
Pro bolt should do them as per OEM look. They certainly do them for 748-9** I assume they are the same. I have them on all my bikes.
When you replace them, make sure you actually take off the nose cone....so much easier and you wont loose any of the nuts
I didn't realise there were other posts on this, forgot to check back in ! Still was just going to update with a link to a set I've found in case if helps anyone: Ducati Screen screws & rubbers kit, 848 1098 1198 BLACK | eBay
CT Moto sells them. (Carbon Trader) CTMOTO BY CARBON TRADER - DUCATI BILLET ALLOY CARBON FIBRE SPECIAL PARTS
2 points to Matt for that answer.:wink: Double top though to Sam, he split Matt's arrow in half with that one :biggrin:
I found that using the ring end of a spanner to slide down and grip the captive rubber nut worked ok as well...think it was a 10mm which had the usual angled head.
