Ohlins FG43 Road and Track front forks in excellent condition, last set up by pro twins when fitted to my bike and hardly used since but very well looked after. £1100 (will px with standard shocks in good condition)
Yep can include the bottom yoke/stem, it's powder coated black though not that it can be seen when fitted, but again is in good condition and excellent finish.
Dave, I have been unable to find any information under FG43 on the Ohlins web site so would appreciate a little spec information. I'm guessing that if they are on a 996 they are 53mm diameter at the top and 61/62mm diameter at the lower clamp ? Also interested in what springs are fitted if you know. Many thanks, Andy
i was told by harris that FG43 was a generic term for the R&T 43mm (innner) USD forks the actual part code should be stamped on the inside of one of the fork bottoms
Hi Andy, Tbh not sure about the springs other than being ohlins branded, will measure and confirm sizes this evening hopefully, will also check for any additional markings on the fork inners. Ta Dave
Unfortunately I'm stuck in London tonight but have got the missis to try and measure and using string to measure the circumference and work out the diameter(can't find vernier) she's said 53/62 is correct. Also as best she can make out, the following is stamped on the inside lower fork legs - FG43 2001.04.23
Thanks Dave, much appreciated and I'm sorry you are stuck in London away from home and loved ones. I'll get back on the Ohlins web site and see what I can gleen. Regards, Andy
No worries Andy, I work in the city daily so am used to the commuting troubles. If it's any help I have the user manual on PDF which I can email over.
Hi Desmodave id be very interested in your forks for my sp3, I have Showa forks on there at the moment if we can come to some arrangement? thanks 916epa
