Son of Big Blue Balls....

Discussion in 'Builds & Projects' started by Nelson, Aug 17, 2013.

  1. I was, now sporting an 848 wheel and discs.
    Wheel spacers were 30mm to replace speedo drive, the other side was a cut down bearing.
    61905 6905 2RS Thin Section Sealed Deep Groove Ball Bearing 25x42x9mm | eBay
     
    • Like Like x 1
  2. that sounds very possible in theory , me putting it into practise is the problem.
     
  3. Get ready to be hooked ;-) you'll be joining us racing by end of the year ...
     
  4. Best turn the 1098 into a track bike. :wink:
     
  5. His 848 will be enough...be quicker than Craigs 996 anyway ;-)
     
  6. Craigs bike only needs a service, then it will fly
     
  7. With someone else on it pmsl
     
  8. Sounds like my bike(s)...:rolleyes:
     
  9. Part Deux - bigger balls.

    Appears to be the day to be revealing ones projects. :pompus:

    Big, big thanks to Andy FE @final_edition for the machining of spacers, not only for the swinger, but the slipper.

    @andyb Thanks for the swinger...:upyeah:

    IMG_1244.JPG IMG_1252.JPG IMG_1267.JPG IMG_1374.JPG IMG_1375.JPG
     
    • Like Like x 2
  10. is that a pierobon engine stand?:Kiss:
     
  11. Pallet o nicked...:upyeah:
     
  12. Got your rocker yet? :(
     
  13. what one are you using......
     
  14. It's all in the detail, evidently...
     
  15. Pineobon actually :)
     
  16. Same as FE.
     
  17. Prog pic...:Snaphappy:

    IMG_1414.JPG
     
    • Like Like x 2
  18. is that your rocker you are going to use or something else for a mock up?
     
Do Not Sell My Personal Information