I know it's been some time but hey ho, my original idea for the 2013 (4 fixings) style screen didn't work, but if someone is willing to try fit just 2 short spacers to the top 2 fixings ONLY, maybe just maybe the screen will flattern out with a little flex to allow the fixing centres to lign up? I think it's a long shot but if someone is willing to try I could sent a Pair of short spacers out, ideally someone that is used to tinkering and finding a solution, I have 4 small spacers so looking for 2 guinepigs, must be Uk based, better still if your around the Leeds area to try
HI, Happy to be a guinea pig. I am 6ft 2in and have 3 screens to play with, carbon shorty, touring and a MRA Vario.
Doesn't need to be Leeds, PM me your address and I will send you 2 spacers to see if you can get them to fit
I have just sorted my screen out! Well Sort of! I have a gt and found the touring screen horrible! So I got the MRA vario screen but that still wasn't great, I have used the original 2 bottom screw holes with the mra fixings and spaced out the top fairing with rubber spaces to about 38mm. This has made the screen steeper and it's far far better now, it's easily the best 2013 I've tried! The only down side is I had to drill new holes for the fixings at the top of about 13mm out from the original screen holes, but I'm not bothered as it has done the job! It would be great if we could get just 2 Aztec spacers at 38mm length rather than using rubber spacers and a long screw!
I originally produced spacers at 22mm and 44mm, if people are happy to drill extra holes? Job sorted they are ready to post
H Hi Big Stu I was looking to make some screen spacers too. I notice that you haven't had to re drill the screen, is that due to the angled ends? What have you used to make yours? This is a bit cheeky, but do you have any drawings/dimensions and angles that I could have from you? Or, if you are looking to sell some, I would be very interested Thanks in advance Deaks
Still testing sizes and angles at the moment so I don't have any drawings yet Was working on this design but changed my mind for the time deing ..? Used delrin bar and my angled blocks drill the holes in the bar in the blocks too get then square bingo
Hi Stu, were you pleased with the end result? I notice you had a few sets for sale at one time: 2013 Screen Spacers X4 | Ducati Forum ....any plans to make more? (I keep getting emails on the subject of screen spacers for the 4-point mounting screens). If not maybe Dave W (@Aztec) might be interested taking up where you left off if you have drawings ;-)
Hi, if you run out of guniepigs im willing to give it a try, youve been to my house before, i live in horsforth,
Hi Andy hope you are well I found they do help me at 6"4 And more room for my sat nav I think I have a set ready I can make a few more if I buy some more bar if a few want some send me a pm and I will try to sort them out ,, drawings make a sketch [emoji3][emoji3] stu
The last couple have gone with the Palmer Products setup now but I'll refer any future enquirers here Dave (Aztec) has let me know that he doesn't have time to set up production of the 4-piece spacer sets.
Hi any one wanting 4 spacers angled for the 2013 Mts 1200 give me a pm and I'll try to get you some made stu
