Ebay 1098 Project / Shed Build

Discussion in 'Builds & Projects' started by slof, Jul 31, 2013.

  1. Nice cankle.

    You need to get some mag wheels for that chair!
     
  2. ha ha thanks.

    oh another item i got was a 1098r carbon under tray for £35. you'd be surprised what people accept for best offers. it was up for £100
     
    • Like Like x 2
  3. Ar...you're the one they all moan about when people offer piss taker money ;-)
     
  4. don't ask you don't get. But I'm not one to offer silly money for something that's worth allot more. At then end of the day they don't have to accept my offer.
     
    • Like Like x 1
  5. Had this turn up :) 1622622_10153775087865377_1385786121_n.jpg

    1622622_10153775087865377_1385786121_n.jpg
     
  6. got some more cleaning bits yesterday hopefully going to get the down pipes looking fresh. If all goes well and people like the end result ill be providing it as a service for some beer tokens

    3 polishing wheels
    3 bars of polishing compound
    15 felt heads
    and polish removing powder that looks extremely suspect

    came to under £20

    IMAG0461[1].jpg IMAG0463[1].jpg

    IMAG0461[1].jpg

    IMAG0463[1].jpg
     
  7. So I had a crack with my polishing kit and I was amazed at the result the picture is of the link pipe that goes from the front cylinder head to the link pipes it had about 15 seconds of contact with the course wheel and compound
    [​IMG]
     
    • Like Like x 1
  8. Well Im sure you're on the mend. Summer is just around the corner....somewhere on the planet :)
     
  9. im walking now which is nice so im able to start working on the bike a bit more ot get it ready for the summer. the problem iv got at the moment is that the engine paint has started to come off so no matter how much i clean it it still looks a bit ratty and without dropping the whole thing out i need to get this sorted im stuck on what to do :( any suggestions?

    1904082_10153823981465377_2002001904_n.jpg

    1904082_10153823981465377_2002001904_n.jpg
     
  10. the pile of parts has now started to stack up so i got to work yesterday and iv got to say a coolant hose change is a right pain in the arse!

    So below is what needs to be fitted iv also got some medium compound grips and renthal bar ends on the way
    1911896_10153903755850377_711355007_n.jpg

    then before
    1779937_10153903755490377_740511150_n.jpg

    and after
    1795621_10153903766825377_1137984533_n.jpg

    1911896_10153903755850377_711355007_n.jpg

    1779937_10153903755490377_740511150_n.jpg

    1795621_10153903766825377_1137984533_n.jpg
     
  11. I thought id give an update on cost as well as Im interested

    Number boards £40
    carbon clutch cover £10 rrp £54
    DP pressure plate £20 rrp £120
    water pump cover £10 rrp £30
    carbon air duct cover £40 rrp £170
    seat vents £30 rrp £75
    Carbon front fairing £82 rrp £280
    belly pan £110 rrp £350
    Rental clip ons £40 rrp £130
    Samco hoses £50 rrp £130
    Carbon under tray £35 rrp £110
    super sprox front and rear sprocket set £16 rrp £123
    power commander 3 £54 rrp £250
    dyno jet multi function hub £30 rrp £100
    termi cans £280 normally around £450

    Total cost £802 should have cost a whopping £2210!

    not doing to badly if you ask me
     
    • Like Like x 2
  12. How do you pick things up so cheap?
     
  13. i do a 9 - 5 desk job so around 90% of my day is spent surfing the internet ha ha.
     
    • Like Like x 1
  14. Isnt it just. Did you replace them all, including the ones to the overflow tank? I did, fuck me, that was two hours of getting proper pissed off just for one bloody hose. Would have been a lot easier if i'd just removed the tank and airbox :upyeah:
     
  15. Yeh that one on top of the engine was a right son of a bitch. Hope I never have to do that again
     
  16. got some shiny nuts through today and also have a std size front sprocket and some more samco hoses coming in the next few weeks.

    so all going well if i get my stand this week i will be fitting
    new sprocket front and rear with red dp chain
    sprocket nuts
    termi cans
    carbon under tray
    carbon water pump cover
    rental clips ons and grips
    hel small break and clutch res
    and the thing that makes it look like a real race bike...... pink pipe
     
  17. so got a bit of an update after thinking i was only in the garage for a few hours last night when in actual fact it was more like 6 :p

    iv managed to make myself a little work shop space its a bit like a time machine i lose all concept of how long iv been in there.



    IMAG0527.jpg

    i got cracking with the clip ons, grips and res kit very happy with the look and more importantly the adjust-ability in the bars
    IMAG0531.jpg IMAG0528.jpg
    the exhaust was next to come off ended up having to drill out 2 of the 3 heat shield bolts and faff with the valve cables.

    I was wondering as iv seen it done before what would i need to do to remove the valves from the link pipes iv heard it helps smooth things out down low. any advice would be brill

    and this is what a bit of elbow grease and a dremel gets you
    IMAG0532.jpg
     
  18. so had a set of 8000k hids, new clutch plates and running lights. The hids we so easy to fit and the slim balast weighs next to nothing.

    [​IMG]
    [​IMG]
     
  19. For a simple mod it takes years off the bike;- the old school yellow bulbs dates the bike. I've seen loads of ads on eBay for the HID conversions but what about the running lights? Where did you get those from please?
     
Do Not Sell My Personal Information