i have my bike advertised on here as a whole but if i have enough interest in the parts i would break it. it has some lovely bits on it. ohlins r+t forks with radial bottoms and 108mm spacings performance technology calipers ohlins rear shock carbon swingarm cover with chainguard magura master cylinder jhp slave cylinder magnesium wide track yokes marchesini 17" wheels with pfm discs standard spare wheels with brembo discs and nearly new wets pp tuning bars corse rearsets have road or race shift available sp quickshifter in race (its the lever only type) carbon/kevlar body work air filters that clip over velocity stacks black samco hoses jtr corse slipper clutch with new plates, spider spring, bearing etc aluminium subframe kevlar larger airscoops 50mm termi polished system with titanium cans power commander III engine has new belts fitted and serviced by g tech only 100 miles/ 3months ago let me know if there is anything you want if there is anyone i could send a pic or two of the whole bike to, and they put it up for me it'd be much appreciated thank you
possibly breaking trick 996 track bike with price list after having a lot of pm's about prices etc. here's a list. the bike will not be broken until its financially viable to do so. so if there is anything you want let me know. tank and pump £100 rear ohlins shock £250 front ohlins forks with radial bottoms £800 magnesium triple clamp yokes £500 engine with new belts and service £1000 frame with v5 £400 polished 50mm termignoni exhaust system with titanium cans £450 marchesini wheels with cast iron discs £450 brembo wheels with very good wets and aftermarket brembo discs £325 marchesini rear £200 front brembo wheel with a very small kink in it £60 corse rearsets in road or race pattern (new) £175 sp electronics race shift quickshifter £250 loom and ecu £100 power commander III £120 performance technology calipers with new ap pads £300 magura master cylinder (same as a brembo) £120 clocks £100 jhp slave cylinder £75 smt crank case breather (red) £65 black samco hoses £70 radiator £50 carbon/kevlarrace fairing £200 (carbon bellypan is exposed carbon) carbon mudguard (sprayed black) £30 pp tuning bars £50 larger kevlar air tubes (exposed weave) £100 i would do the whole front end, forks, yokes, spindle, bars, calipers, mudguard for £1500 all prices are plus postage. any interest call me on zero7805 six 034two 4 done the number like that as last time i put my number on the net i got 60 calls in 1 day from some muppets trying to say i was entitled to some pp claim even though i have never had any cheers john
Some bargains to be had here, i don't think you will have any problems at those prices, as for the tank and pump, is it red? any dings or scratches? i am interested.
cheers spike. i am a realist when it comes to pricing (well, i think i am anyway ) the tank is matt black it had a small dent in the back of the tank (about 10p size) but i filled it when i sprayed it. its in good condition.
Hi John PC3 fitted to 16m ecu ? If so and you decide to break the 996 i will take it off your hands. Are you having probs loading pics ?
I have no idea. The ecu is rectangular with a circle of rubber in it and a 'flashed' chip in it. Excuse my ignorance. But very new to the ducati and still learning about them.
i have been reliably informed that it is a 16m ecu with an ultimap chip. it has twin injectors but only one is plugged in. apparently this is to cure the 'missing' problem they have around 4500rpm the bike does rev very clean all the way through the revs. i have told a couple of people that have pm'd me that the bike will be broken if i get firm bids on the front end and engine. as i have told others, i don't want to mess anyone around but don't want to be left with a large lump of unusable bike sat in the garage. the only reason i have it up is i have been offered a nice cbr1000rr and fancy it, but can't afford that until this is shifted. if the bike or bits do not shift i will keep it and carry on using it. cheers john
Try Imageshack mate quite straightforward. Once you upload onto there you need to copy and paste the forum codes it gives you onto here. Good luck. (or if they are on an iPhone use the picup app)
It's easy! click on the insert image button and down load pics from your picture files on your pc/laptop
not so easy! it keeps coming up with 'file error' been trying for a while and now give up. if anyone wants pictures it will have to be via email. sorry but i am shite with computers and do like things to be child like simple.
Hi John I just tried to open the pics and no luck so sorry i can't post them up for you. God knows what type of file they are ?
