899 Help With Oem Quickshifter...?

Discussion in 'Panigale' started by MultiJSY, Dec 13, 2014.

  1. Can someone help me out please by giving me the measurement of the length of the OEM quickshifter between the two rose joints (i.e. the joint at the gear box shaft end and the other which attaches to the std rearsets)? See below:
    [​IMG]
     
    #1 MultiJSY, Dec 13, 2014
    Last edited: Dec 13, 2014
  2. No one? Please someone can you measure the length of the QS, it doesn't need to be that precise, so long as it is within say 5mm.
     
    #2 MultiJSY, Dec 14, 2014
  3. 104 views and no one has a QS they can measure for me? Help me out please....
     
    #3 MultiJSY, Dec 17, 2014
  4. Sorry,my bikes at the dealers but i will measure it up when i am there if no one comes forward,1199 should be the same.
     
    #4 simmytt, Dec 17, 2014
  5. Many thanks simmytt appreciate that. Believe the QS is the same.
     
    #5 MultiJSY, Dec 17, 2014
  6. Wont it depend on how you set the peg height up?
     
    #6 bradders, Dec 17, 2014
  7. I'll nip in the garage in a bit and measure for you
     
    #7 kris, Dec 18, 2014
  8. My 1199 is around 215mm. Hope that helps.
     
    #8 loveIt, Dec 20, 2014
  9. Thanks very much, that is useful and re-affirms what someone else has told me.

    Think I can close this off now.
     
    #9 MultiJSY, Dec 20, 2014
(You must log in or sign up to post here.)
Do Not Sell My Personal Information