Ok as I have no idea how they are called I have hard time finding what I need so need help. What should I search for? I have a 749 oil cooler with both oil lines attached to it. However on the engine end (where they connect to engine) it is not the same type connector as I have on 900ssie bottom end. How is that connector called so I can search for the right one?
AN -6 AN6 BLACK JIC Flare to M14x1.5 METRIC STRAIGHT MALE Hose Fitting Adapter | eBay I used these and made my own hoses up as well to suit. Yorkie
You'll also need to fit a by-pass spring part no. 799.2.077.2A , item 14 on the picture below, or the oil won't go through the cooler.
Yes, of course you can. I assumed from the picture that you are fitting an oil cooler to a bike that currently doesn't have one.
Shit that connector is not the right one. cooler line is why thicker so it does not locate inside nor thread of bolt goes over it.
Mate as I said I made up my own hoses because the 749/999 ones did not fit. If you have bought these connectors already I will take them off your hands. Yorkie
Shit that is what you meant. I will keep to those until I am certain I do not need them. Might do my own hoses but I think I should be able to find a adapter. I have a feeling size I need is M17
Ducati call the parts you need nipples (!) and they are part no. 815.1.022.1A You'll also want the aluminium crush washers that go under them, part no. 420.2.006.4A
