Fitting Brembo Rcs Clutch

Discussion in 'Technical Help' started by lewygoosy, Jun 16, 2015.

  1. Hi guys I'm going to be fitting a new radial clutch cylinder soon and I'm not sure A. What the micro switch does underneath the original clutch and B. What to do with it once I fit the new cylinder do I just by pass it or cut it off? As there isn't a fixing for it on the rcs cylinder. Any ideas?

    Thanks
     
    #1 lewygoosy, Jun 16, 2015
  2. The micro switch might be associated with the side stand switch. Whatever it is you need a banjo with the micro switch as part of it. I am sure it has been mention on here before so a search might get a result. Andy
     
    #2 Android853sp, Jun 16, 2015
    • Agree Agree x 1
  3. I did look, but am still unsure....
     
    #3 lewygoosy, Jun 17, 2015
  4. The clutch switch tells the ECU the clutch is being pulled in, so you could, for example, start it in gear after it stalls at lights!! :)
     
    #4 stretta, Jun 17, 2015
  5. is that all it does?

    i never stall it...:p
     
    #5 lewygoosy, Jun 17, 2015
  6. it could save your life..........stall pulling out of a junction with traffic bearing down on you and you will need to be able to hit the starter.
     
    #6 idrinkbeer, Jun 17, 2015
  7. Disconnect all the 'safety' switches and you'll have no problem starting in gear...
     
    #7 Dukedesmo, Jun 17, 2015
  8. So without the switch it wont start if stalled? I'm sure it wont make a difference would it ?
     
    #8 lewygoosy, Jun 18, 2015
  9. It won't start in gear. You'd have to find neutral, then start it.
     
    #9 stretta, Jun 18, 2015
  10. got you! thanks guys :)
     
    #10 lewygoosy, Jun 18, 2015
(You must log in or sign up to post here.)
Do Not Sell My Personal Information