Ducati Forum Members Discounts On Carbon Parts

Discussion in 'Conquest Racing Ltd' started by Conquest Racing Ltd, Jul 24, 2013.

Page 12 of 36
  1. Hi CC

    Can I have a code please? There are a few bits and bobs I'd like for my 2011 Monster 1100s

    Cheers

    Bob
     
    #221 desmobob, Jun 2, 2015
  2. Cheers Bob, PM sent ;)
     
    #222 Conquest Racing Ltd, Jun 2, 2015
  3. Hi, sorry to mither you...

    Can you confirm the weave is all the same on all the CC carbon parts?

    Got a bit of OCD goin on. God knows how I'm gonna deal with the fact that whatever I buy won't match the cans...:(

    Cheers

    Bob
     
    #223 desmobob, Jun 3, 2015
  4. Hi Bob,

    The weave is the same match as Ducati corse which is a 200 gram weave. The carbon used on the Termi's (I'm guessing that's what you have) is 220 twill weave to give it extra strength.

    All our Ducati carbon is 200 gram as is Fullsix & all our other suppliers :)
     
    #224 Conquest Racing Ltd, Jun 3, 2015
  5. Oh go on then, ping me a code, always need more carbon.
     
    #225 Drinky, Jun 4, 2015
  6. On it's way ;)
     
    #226 Conquest Racing Ltd, Jun 4, 2015
  7. Hi Steve,
    Any ideas when the Multi DVT carbon goodies will be available?
    Cheers Jim
     
    #227 JimVee, Jun 6, 2015
  8. Hi Jim,

    All our suppliers are working hard to get products made, tested & available. I don't have an actual date when they'll be available but I hope to have them by Autum
     
    #228 Conquest Racing Ltd, Jun 8, 2015
    • Thanks Thanks x 1
  9. Thanks.
     
    #229 JimVee, Jun 10, 2015
  10. Hi,

    Is it possible for a 20% code for some carbon bits please?

    Thanks
     
    #230 Steveo, Jul 3, 2015
  11. Sure PM sent :)
     
    #231 Conquest Racing Ltd, Jul 3, 2015
  12. #232 deleteduser211220, Jul 3, 2015
  13. Hi FE,

    Yes it's straight through with no reed valve, all this valve is for is to reduce emissions which in turn lowers performance.
     
    #233 Conquest Racing Ltd, Jul 3, 2015
  14. What part do you need measured?
     
    #234 Conquest Racing Ltd, Jul 3, 2015
  15. I am looking to fit it to a 1098 engine as part of a big breather system.

    I need to know the diameter of the boss the fits in the block(the part with the o ring/s)

    Thanks
     
    #235 deleteduser211220, Jul 4, 2015
  16. We have one in stock for a Monster S2R1000 and the bottoms thread is 38mm

    As CNC Racing don't list this part available for either the 1098 or the 1098 Streetfighter then I would suggest it shouldn't be fitted.
     
    #236 Conquest Racing Ltd, Jul 4, 2015
  17. In the picture in the link, it shows the bottom section with an o ring, rather than the screw. The S2R has the older screw in breather but the one in the link is a push-fit with a tang on the side to bolt it to the engine. This is how the are fitted to the 1098. The only difference I can see is the one you list has a vertical outlet but the 1098 has an angled one. I am after the later style you sell. If it has a smaller boss, I can machine an adaptor to allow it to fit. I just need to know if it something I can work with.

    Just because things aren't listed for a certain model, doesn't mean they can't be fitted. You should know that more than anyone. ;)
     
    #237 deleteduser211220, Jul 4, 2015
  18. Here is the Hyper and 1098 breathers. As you can see they are similar underneath.

    breather3.jpg breather2.jpg
     
    #238 deleteduser211220, Jul 4, 2015
  19. PM sent
     
    #239 Conquest Racing Ltd, Jul 4, 2015
  20. Any chance I could get a code please
     
    #240 Pineapple chunk, Jul 5, 2015
(You must log in or sign up to post here.)
Page 12 of 36
Do Not Sell My Personal Information