Lathe machinist required

andyb · Sep 20, 2012

Anyone on the side that could turn a centre piece with left and right hand threads either side of a 19mm hex for me to join two sections of a tie rod please. I want to shorten the length of the rod to 210mm cheers

andyb · Sep 21, 2012

Sorted Cheers

antonye · Sep 21, 2012

I've got some of those pre-turned in titanium, from a batch of WSB-style ride-height adjusters we did.
Glad you're sorted now though!

andyb · Sep 21, 2012

you little teaser..... :wink:

antonye · Sep 21, 2012

Sorry, been busy today otherwise I would have replied sooner!
I know I have them as I found the all the other bits I needed to make one more adjuster, so I'm going to put that on my 748 and move the black one from that over to the Hypermotard.
Tart's handbag!

andyb · Sep 21, 2012

This is 16mm thread......

antonye · Sep 21, 2012

Found a couple - look like they're M12 though.

andyb · Sep 21, 2012

thanks anyway

deleteduser211220 · Sep 21, 2012

You only have to ask Dahlin'

JerryXt · Sep 21, 2012

are your legs too short Andy??

antonye · Sep 21, 2012

Probably a good job, sure you wouldn't want any "snide" parts on your bike!

andyb · Sep 21, 2012

antonye said: ↑

Probably a good job, sure you wouldn't want any "snide" parts on your bike!
Click to expand...

You are right........of corse

Lathe machinist required

andyb Thread Starter If its too difficult....close it down!
Subscriber

andyb Thread Starter If its too difficult....close it down!
Subscriber

antonye Elite Member

andyb Thread Starter If its too difficult....close it down!
Subscriber

antonye Elite Member

andyb Thread Starter If its too difficult....close it down!
Subscriber

antonye Elite Member

andyb Thread Starter If its too difficult....close it down!
Subscriber

deleteduser211220 Guest

JerryXt Senior Member

antonye Elite Member

andyb Thread Starter If its too difficult....close it down!
Subscriber

Useful Searches

Lathe machinist required

andyb Thread Starter If its too difficult....close it down! Subscriber

andyb Thread Starter If its too difficult....close it down! Subscriber

antonye Elite Member

andyb Thread Starter If its too difficult....close it down! Subscriber

antonye Elite Member

andyb Thread Starter If its too difficult....close it down! Subscriber

antonye Elite Member

andyb Thread Starter If its too difficult....close it down! Subscriber

deleteduser211220 Guest

JerryXt Senior Member

antonye Elite Member

andyb Thread Starter If its too difficult....close it down! Subscriber

andyb Thread Starter If its too difficult....close it down!
Subscriber

andyb Thread Starter If its too difficult....close it down!
Subscriber

andyb Thread Starter If its too difficult....close it down!
Subscriber

andyb Thread Starter If its too difficult....close it down!
Subscriber

andyb Thread Starter If its too difficult....close it down!
Subscriber

andyb Thread Starter If its too difficult....close it down!
Subscriber