Hi Guys, Need a small favor form someone with a Mono, just got a Mono frame and fairing but the fairing, Mono one of course, sits quite high above the exhaust and mono subframe, maybe just me as I used to have a biposto seat... Can anyone let me know roughly what the gap is from the exhaust and tail unit, how far from each other they sit? Cheers
Make sure you have pushed the pin on the tail properly through the rubber bushing on the subframe. Also note that the bushing must be on the correct position since there are three options where to mount the seat and tail on the subframe.
Regarding the three positions ,,,,, i believe it is only the S model ( maybe R ) which has adjustable length ,,,,,,,,,, i can measure for you when i get home after work if you still need . ( S model )
I remember setting my 999s on the Middle setting when fitting a mono seat unit before selling, confused now :Bucktooth:
ok,,, sorry about the pic quality, ( can do again tomo if req ), fist photo shows rubber piece with metal washer,, second pic shows fitted with metal washer on top of frame appeture, third shows hight from exhaust, ( in mm ond / or inch ), fitting is by fitting the rubber piece and then lower seat unit into it,,, easy
Nope, it had a BIP sub-frame with a funny fibre glass mono seat unit, the sub frame showed more than it should and had mountings for rear hangers
i ( think ) i remember reading that one of the features which the " S " had was the 3 way adjustable seating arrangment , which other; dark, norm & R did not have.
Well I'm sure my 999S did, I remember selecting the middle hole! but I have had a drink since selling it
you must have had a few this eve !!!,, i did say all S models !! i use most forward / shortest seating arrangement ,
