I've just gotten myself a new scala q1 set for the wife and I. I've figured out almost everything... music, satnav, intercom and radio. Only thing I can't work out is how to activate Siri on the iPhone. That was my most used feature on my old headset. Sent from my iPhone using Tapatalk
Thanks for the replies - I do actually really rate Scala but need to work out if g9x will connect to the multis dvt system otherwise the wife will kill me for lashing out! My problem is 6 friends all are on Scala so reluctant to move brands The last option is sod the Bluetooth connection to the bike and leave it direct to Scala as is!
Isn't it just the CTRL button? Siri basically replaces voice-dial. I have the Schuberth SRCS headset, which is based on the Scala G9. This uses the equivalent button to initiate Siri According to the manual: Voice Dial During Standby, short press the CTRL Button and state the name of the person you wish to call. This feature is supported only by mobile phones that support the Voice Dial feature.
There's 4 buttons on mine. 2 are volume, the other 2 are a phone button and the other is a button with a wireless symbol. The phone button skips track and the wireless button initiates intercom. I'm stumped and going to have to open a support case with cardo [emoji107] Sent from my iPhone using Tapatalk
That's radio. I've been told to press the two buttons simultaneously so I'll see if that works in a mo. Sent from my iPhone using Tapatalk
Tried that out the box and it didn't work but having just tried it now it is working a treat. Guessing it was the firmware update I did [emoji106] Sent from my iPhone using Tapatalk
