Hypermotard Gallery

i've got an r&g tail tidy too, it's just arrived two weeks before my new SP

 

Nice colour scheme that! Look forward to seeing the termi! :smilingimp:

 

Looks a clean one! :tongueout:

 

Here is mine, brought almost two years ago from Ducati Alton.
The bike was first registered to the shops owner hence the nice reg. Love it.

 

On a side note I saw an mt09 with the plate "MT09.COM" thought that was pretty cool.

 

One seriously cool piece of exotic engineering, and a big ship (Harmony of the Seas, world's biggest cruise ship)...

 

Nice looking sp
Also heard on the radio (Sam fm) that she was docking today wanted to pop down

 

Saw that ship on the local news this evening the presenter was at almost the same spot as your pic.

 

There were quite a few folk taking a look when I was there, couple of other quite large cruise boats docked as well.

 

Some of the first mods. CNC racing bits, Lightech axle protectors, engine cover. Still waiting for exhausts, linense plate from Rizoma as well as the engine sliders.


First mods two by Ampj8 on Ducati Forum

 

Also mounted the Heated grips and a USB cable over the GPS plug, initially the dealer could not find it then apparently he did, so it takes when the switch is on.
Those mirrors are a No-GO I will definitively go for bar end ones, can't even see well behind me.


First mods by Ampj8 on Ducati Forum

 

Last but not least the CNC front sprocket cover. I would love to also change the rear sprocket for one of the black and red ones they have ..... I think will wait some more time for that.


First mods 3 by Ampj8 on Ducati Forum

 

what is the device mounted on the handlebars obscurring the ful filler cap?

 

Didn't understood the question but from left to right. Mounted the Ducati Performance brake fluid in red alu, then there is the SW Motech GPS mount that goes over the bolts that hold the handle bars, with my old Zumo 220 which works well for me, then you have the remote for the GoPro.

 

ah, remote for a gopro lol, it was supposed to say obscurring blocking the view of?) the fuel filler. i've never seen one before

 

AAAHH yes the fuel filler is the CNC carbon cover one. Forgot to mention it!
One thing I've always wanted to change on my 821 was the look of that fuel filler cap! so either change it completely or get this cosmetic cap in carbon. Opted for the second one and I am happy, my annoyance is gone.

Now I will live with the one of rear sprockets for a while.

 

this is my old 848. it had a billet drive flange and a ducati performance plastic sprocket carrier and two part sprocket that fitted together like jigsaw pieces, then held on with titanium nuts

 

Why don't many hyper owners change the exhaust, seems a large number of them are running the standard setup still?

 

I really don't know but some people "core" the stock exhausts - Ie cut the stock tail section open and make it "straight through" which give it more of a growl...id say more to the point I see loads of people not removing the cat underneath....that thing should be against the law...

 

Haha. I've ordered a MIVV end can. Not sure if it keeps the cat on my 821?

It's on a slow boat from Italy it seems, damn seller takes forever to post.