Has anyone installed their own Termis? Managed to get hold of a 2nd hand set. If so, how hard was it and how do you install the up-map? Any chance someone could lend me their instruction sheet so I can crack on? Thanks.
You can download the instructions mate, with regards to the upmap, it needs to be done by a dealer as it codes it to the bike. But the pipe install is fairly simple Sent from my iPhone using Tapatalk
Thank you. Any ideas where from - searches and can't find a site. They have been sold with the up-map stick included. Hope it's not corrupt/empty now. I thought it was going to be a simple plug in job?!?!
I think if u google the part number and fitting instructions there is a Ducati link with the pdf's Sent from my iPhone using Tapatalk
1199 upmap is done direct to the bike, no need for dealer kit. The key plugs in to the diagnostic socket under the seat. Install is pretty straight forward. Rear mounts are a bit fiddly and the only awkward bit can be the three screws that screw to the flange near the exhaust valve. These corrode and take no snapping at all so be careful there. I have the instructions if you struggle to find them. Too big to upload here but drop me a pm with your email address and I'll send them.
Thank you to all, especially @Mr C and @nelly. Superbly helpful - exactly the reason I'm a member of this forum!
It'll be disabled as part of the kit install. Motor and cable go. IMO, not much point in doing anymore to be fair
