hi guys. just ordered a new sp that should be ready to collect in two weeks. i have a ducati paddock stand from a 1098s and intend to turn the spindle down on a lathe at work. could anybody tell me what the spindle size should be for the hyper? thanks
Does anyone know the exact pin size for the 939 SP? I have a new set of stands but the pin was sized to my guesstimation rather than copied from an existing stand design... If anyone could stick a caliper over their stand pin, that'd be great!
Awesome, thanks very much! No, I have a set of Geetech stands that were made to my estimated pin size. Turns out my estimation was shite as it's a wee bit loose. I tried to measure the spindle hole last night but it's too tight and long to get a decent reading from my vernier...
I measured my pin last night and it's 21.8mm. Hopefully yours is larger as my bike doesn't seem massively stable with that pin size...
Apologies for not getting back on here last night, pulled an all nighters at work. I measured the pin (genuine Ducati) 21.58mm and 25.66mm. I also made one up myself a few months ago and I'd found this Mine feels just as stable as my 848 ever did. Hope this helps
That's a huge help, thanks very much! I asked Geetech to make my pin 21.8mm dead so that's why it's not massively stable. I hadn't even thought about stepping it to take the larger of the 2 bores. I'm lucky enough to have access to a bank of lathes at work so i'll be able to knock something up with that detail... :sunglasses:
Here is a photo of the size via an old Vernier, before you mill it down. I do have a spare 1 you can buy for £29.99 inc postage, if you want both options.
The only suitable bit of scrap I could find was Super Duplex so my new pin will definitely out live the bike. :tearsofjoy:
I have a Ducati Performance stand with a XDavel wheel pin. I need a pin for my S4RS. the dimensions are whats in the above photo. Would anyone with access to a lathe be willing to make me one Of course I'd be willing to pay for it thanks
I think I have one but it’s my first attempt but in mild steel rather than stainless. It’s yours for postage if I can find it. But it will rust if left outside.
