Ducati 1199s Clutch

Discussion in 'Technical Help' started by Pip, Apr 28, 2017.

  1. Hi
    I have just fitted a Ducabike cover/pressure plate and retainer plate; but I have a SOLID clutch lever! now ! Almost as though it's a hydraulic lock, and I've bled both lever and slave cylinder to no avail.
    Can anyone leap please.
    Phil
     
    #1 Pip, Apr 28, 2017
  2. It's possibly the way you've fitted the pressure plate and it hasn't seated properly on the splines.
    The triangular arrow on the pressure plate has to line up with the spring post that has a slot in it.
    If you did that, then try just fiddling it about so it slides on to the splines.
     
    #2 Old rider, Apr 28, 2017
  3. Thanks for that, I will give it a go. The pressure plate is standing proud by an 1/8" . I'll let you know.
     
    #3 Pip, Apr 29, 2017
    • Like Like x 1
  4. Sounds very likely that's your problem then.
     
    #4 Old rider, Apr 29, 2017
  5.  
    #5 Pip, Apr 29, 2017
  6. Thanks 'old rider'. Didn't see the Centre dots on post and plate. Once aligned all fell into place.
     
    #6 Pip, Apr 29, 2017
    • Like Like x 1
(You must log in or sign up to post here.)
Do Not Sell My Personal Information