1199 Fairing Removal

Discussion in 'Panigale' started by Sam1199, May 29, 2017.

  1. I'm trying to get the nose cone off, rubber grommets thatretain front screen screws have disappeared. Released everything else off except for the attachment to the headlight right at the tip of it.

    Got the splash guard off underneath, converts etc. Nothing else seems to be holding it on, just the nose.

    How is it released?

    Advice quick please. Need to get it all back together for Donnington tomorrow!
     
  2. its just a pencil sized post on the fairing, into a rubber grommet. it wants a bit of silicone spray on it while its off.
    you need to push the whole fairing forward, while wiggling from side to side and up and down. it may help to to prise the nose up slightly with something plastic faced to release it slightly before you start.
     
  3. So basically it just needs pulling carefully
     
  4. Done, easy when you know how, didn't want to force it, thanks.
     
  5. good man :upyeah:
     
Do Not Sell My Personal Information