Don't you have a magnetic telescopic tool, ya know, when you drop a nut down where it's impossible to reach? I've used mine so many times!
Thanks Pete, my only worry is that the disc is not magnetic, but I very much like this tool!! AND the camera link you sent earlier, thanks alot mate!
Well I luckily received my new exhaust & decat pipe last night and fitted them, well chuffed!!! The original cat and silencer will be airlifted to my loft!
Nice, how much? Do you need rear pegs in to fit? Does it need mapping? Any improvement in performance or illuminating flat spot? Cheers.
Quite pricey at £816 especially as it only cost £300 for a quality decat and carbon 2 brothers can for my last bike (ZX10r). Just had to remove right rear peg when fitting but then goes back on fine. Went for a blast today and seems to pull much more smoothly and no flat spots at all, was brill! Also it is a lot louder but wouldn't expect anything else. I don't wear ear plugs and certainly not any more painful when riding. No need to tune as lambda sensor still intact in the header pipe. I also fitted a healtech servo eliminator just in case.
Thanks Glenn, just got the rim tape from eBay, I also bought some plain red tape at the same time but chose these ones to fit first.
Yeah sure, first link is what I got for mine, but the company on ebay has many different designs (a few more links below for reference): http://www.ebay.co.uk/itm/Ducati-Mu...s-12-rim-stickers-set-1100-1200-/321916655921 http://www.ebay.co.uk/itm/Ducati-Mu...660829?hash=item4b0cc31d5d:g:qbAAAOSwiONYNFTp http://www.ebay.co.uk/itm/Ducati-Mu...cals-rim-stickers-stripes-1200s-/322336660829
Yes mate, I just use stainless Allen headed bolts to fill the holes, tried black bolts but it looks a little odd.
Afternoon all, here we go again with another addition about this engineering wonder. Can I just confirm that the 'Normal' position for the valve is Open ? Mine has been freed up now and want to double check what the states of the valve should be. Its got to go back to my local dealer anyway for the warning light to be cleared and for a couple of other issues to be sorted.