VtwinDave I’d like to buy these from you please? I’d be grateful if you could also confirm that they’ll fit onto a year 97 916 too? Many thanks. 2Twins
@2Twins not sure these will fit your master cylinder as these lines are for the underside banjo. Have a look to see if yours will accept the 90° union. I'm after some lines but need straight union both ends and mines a 96 bike.
I’m not sure but look at your original lines to see what shape they are , are the 916 front calipers not the same as the later 998 calipers only for the 40mm / 65mm spacing . The ends with the bends go on the calipers
All Thanks for the information. I won't be home until next week and will check the fittings then. It does sound as though they aren't suitable though, so don't hang to them if someone else wants them. Many thanks. 2Twins
VtwinDave I had a look today and there is a straight banjo from the end of my master cyclinder for one line which is split above the mudguard with a t piece. Sorry, but these aren’t for me after all. Good luck with selling them though. Cheers 2Twins zxrjohn14 Thanks for your guidance - I appreciate it. Cheers 2Twins
VtwinDave Thanks for your message - that clears up my misunderstandings. Can you send me a pm please and we can make arrangements? Cheers 2Twins
