To everyone using T800 upmap. Soon i will flash my bike back to standard map to take it for a service. However, if they do any ecu updates like the last time i serviced it. the new map will be different from the original standard map that it copied onto the app so how how do i go about uploading the new standard map??i can not see an option to delete the saved map or an option to upload a new map!! Cheers
Contact Termignoni and ask them. Or try the UK importers, BR Special Tuning. I've found them very helpful.
Yes ive emailed the upmap website but they are terrible at replying, ill give others a go also cheers
Great thanks a lot for the reply So assume that once i link the T800 back up to the bike after the service it will detect that the saved map is different to the one on the bike and prompt me to overwrite it??
One more question about the T800, it says it disables the O2 sensor and it may be in my head but im sure the map is still adjusting. When i first download the map it runs perfect but after time and only on some days it seems to run really lean with a lot of backfiring. Do you need to disconnect the O2 sensor after uploading the map? I cant imagine why if its been disabled though!! cheers
I have the hypermotard 950 and i have the termignoni map with db killer out. Bike has arrow decat with standard pipes. I initially had the map with db killer in but thought it ran better with the “out” map but it still seems to change. No backfires or popping stray after i mapped it but then it started. I wonder if the current air temp could have a big effect as its a fixed map
Its just the stock airfilter, i have just put the cat back on though and will get some zard pipes soon and just run the standard upmap option i think and see how that goes. I dont need the extra HP of the decat and cant be arsed swapping it back for every service
Hi James, I bought a Termi end can with a MIVV decat pipe that I want to instal on a 2017 Multistrada Enduro and I've been told by the dealer that I need a Upmap T800. Do I need to buy one and where can I can because the UpMap.It website could be clearer. Or can I get 1 2nd hand? Clearly this topic is totally unclear to me. I hope I've asked the right questions. Thanks
If you need the upmap cable. I can let you borrow mine. Saves having to buy it; as they’re not cheap.
Thanks! Very kind of you. Does it come separate to the unit shown? I didn't realise that the cable could be bought separately too! There in exposes my ignorance of the subject matter!
Yep, cable separate from the upmap puk. pm me a message with your address if you want me to post it. Already done this with another guy on here with good results.
Apparently Hi, not sure if this is how to PM on here, only been here for a week. Apparently my Ducati 1200 Enduro (2017 model) has a Bosch ECU so doesn't have a UpMap! So I am stuck with the Termi end can and the MIVV mid-pipe. My options are to get a suitable power commander and get it dyno'd to tune and map it. I've made some calls and checked on the UpMap website too.
