Ducati Rear Paddock Stand

I have one, fits the 848 not sure what other models.

 

Yes it’s the gubellini franco stand that make the Ducati stands

 

Just to advise, the 848 pin is too small for many of the bigger bikes such as 1*98, panigales, multistradas & diavels etc

 

That looks like & could be a 21.5mm pin.

 

£100 inc postage.

 

I've many of the above stands and i think that's a fair price including post & packaging, perhaps if the OP collected it he could save on the post costs, of course that depends where he lives.

 

I have 3 of these: two left sided and one right sided. They work admirably, especially with the bar that allows to block the wheel for removal/tightening of rear wheel and sprocket nuts (looks like it’s still there on the pic). Very handy! The pin is the small 21,5 diameter one that works on 748/916/996/998. It also works for other bikes, like my wife’s M796.

 

Iam selling 1 Ducati gray Used was fitted 2 a panigale think it’s 40 mm £90 pick up Leeds area or plus postage

 

Iam in Leeds. You will have 2 check regarding spindal size mines 40mm

 

Hi yes it will definitely fit

hi yes it will definitely fit as my was a 2012 848 evo..

 

I’m near Cambridge

 

Both stands are for carry out maintenance works, but just the rear stand will suffice.

 

I store my bikes only using the rear stands. Quick and easy way to keep the bike straight and save a bit of space. Front stand only to remove front wheel and generally work on the front end.

 

Mines still 4 sale £90 based in Leeds