Looking For 999 Titanium End Can.

Discussion in 'Wanted' started by Paul55, Jul 10, 2021.

Tags:
  1. I have the standard one and would like to buy the titanium version. Good used condition is fine. Can swap/sell my steel one.

    Paul 07482 339888, West Sussex.
     
  2. be careful with these, as back in the day I sent 7 ( yes 7!) Ti end cans back to Ducati due to them tearing open from the upper mounting point.
    some did it after the first session on the track from new...
    I believe there was a modification on later versions, but have no details on what the recognisable differences /Pn changes were.
    many you will find online second hand have had welding done to the upper outer skin.

    https://www.picclickimg.com/d/l400/pict/192571281851_/Ducati-999S-02-07-57mm-Titanium-Termignoni.jpg
     
  3. Thanks my friend, I had heard of welding on these, so will try and ask the right questions.
     
    • Like Like x 1
  4. I would suggest steering clear of the Ti Termi and maybe look at a Zard which were always much better quality anyway.
     
    • Like Like x 1
  5. I have a full Termi system I could be persuaded to part with, it's on my old track bike, can't part with just the can as all the pipes are larger (57mm system?)
     
  6. Thanks Ivor. I have the "banana" system, but trying to lose some weight at the end.
     
    #6 Paul55, Jul 20, 2021
    Last edited: Jul 20, 2021
    • Like Like x 1
Do Not Sell My Personal Information