I have just got...new tyres on. But I have some problem getting the speedometer relay unit... to sit correct . look at the video.... as you can see if you look at the relay unit.. when I turn the wheel backwards.. the unit move back... not good :-( Forhjulsdrev - YouTube (ignore the sound.. its som plastic I have wrapped around my front wheel stand ) I first think I have installed the front wheel in wrong procedure.. so I did as I read in a guide somewhere . - I put in the wheel axel.... position the relay unit... without tighten something - put on the brake calibers.. and tighten to 43 nm.... I pump the brake... - I tightens the 28mm axsel nut to 63 nm - I took the front wheel of the stand .. and pumped the suspension a few times - I then tighten the 4 12mm bolts to 19 nm Whats wrong?? is the axel not tight enough?? or why is relay unit... loose??
