I’m moving house and won’t have space for a workshop , so need to move on a bike lift table , belt driven compressor, table top sand blasting cabinet , manual wheel changer and other stuff I’ve forgotten. I’ll get better pics if anyone is interested , but you can see most of the items in the attached Collection from Walton on Thames , Surrey The bike lift table , I’ll get the rating but it’s a big un . I’ve had bikes such as a MTS1200 and a very lardy CBR1000f on it. It works well , has the locking bar and the wheel clamp and a scissor lift that also fits on along with a couple of tie down points. Been great and I’ve only had to top up the oil once. £150 - it’s very heavy so you’ll need to bring a mate as I’m no use at lifting SOLD Pending Collection The compressor is SGS branded and 14cfm output with a 90l tank . It works on my single phase garage sockets , but the manufacturer warns that it might not on all as it needs a hefty bit of juice to start so you may need a 30amp running . £150 SOLD The blasting cabinet is no name brand but all gloves are intact etc . I also fitted an additional filter / dust extractor on the side for soda blasting - £50 SOLD The tyre changer is a Sealey and looks a bit of a state as it’s been bolted outside the garage for a number of years . I have all the locking bars , tyre lever and an easy off bar that makes tyre removal a doddle.- £50 . Take it to your local powder coater and it will be lovely for another 50 I guess - UPDATE It was deemed too tatty for a couple of buyers so I’ll restore it and relist later. Ultrasonic cleaner - it’s a big un 30l and heated with timer ,and works great. I fill it with hot water and put parts into plastic tubs with appropriate detergents . Keeps it clean - £100 SOLD Pending Collection Little electric oven with 2 heat plates. I use it for drying parts after cleaning , curing painted items and heating cases prior to fitting bearings etc. £25 Provisionally SOLD Vibratory Tumbler - put small stuff in comes out deburred or cleaned depending on media £50 330mm Cut Off Saw - £50 Steel Double Door cabinet full size . 2 shelves - £50 Sealey Pillar Drill - I’ll get pics £50 SOLD Ducati Gubbelini OEM rear paddock stand with 40 and 42mm spindles -£100 Spare 40mm pin only - Free
The bike lift table, is that the black scissor lift under the dirt bike or the red one under the multi that you're selling for 150? And anymore info on the tyre changer?