If anyone has the above system, could you possibly give me the dimension of the pack rack, namely the inside and centre dimensions of the tubes that go into the "L" brackets. Also there seems to be a bracket that joins the 2 L brackets, a picture and dims would be useful. Basically I try to make one up from bits as full system is a bit expensive. Any help would be greatly appreciated. Cheers Gaz
For information from a previous post I made - the recommended rack for the 900 was the same as the one for the 916 Biposto - ventura #14 but it pushed down into the seat a bit, whereas the one for the SPS - ventura #16 sits a bit higher and has a comfortable clearance. Not Ventura-ing into the garage at this hour but will try to remember to do some measuring for you when I get home from work one day this week. I don't recall what The joining piece for the L-brackets looks like as it has been on the bike for maybe 20+ years. The 900 is in the "naughty corner" at the minute as it smoked a reg/rec so I don't think I can get at it to photograph that bracket. The L-brackets and rack are more accessible so should be able to measure and photo them.
98 SPS No problem thanks, I know people are a bit busy with other things and garage's are bit cold this time of year. Thanks for other info. Cheers Gaz
Hi Gaz Took a few pics tonight. Its a toasty 12 degrees in the garage. Let me know if there are any other angles you need.
The racks used to be all the same distance between centres BUT I bought a set of side brackets for my Aprilia Shiver and the centres are 50mm wider! Ventura racks now come with swivel joints at the bottom for "universal" fitting - Bastids! As you mentioned - they are Expensive so bollocks to spending any more with them, I will be getting a mate to fabricate an adapter.
I found this and believe centre distance should be 314mm. From the photo that looks about right if you could please confirm that, I can't quite work it out from angle of photo but there are no other dimensions that are close. Cheers Gaz
Hi Gaz I knew i had a few parts in the shed and was in there today, is it the cross joining section your after? side brackets you have ? or none of what I have,
