Going over my s/h 1995 BIP and removed clutch plates but they don't match any grouping I am aware of, there are 9 driven and 6 drive in there :- 6 driven 1mm 1 driven 1.5mm 1 driven 1.5 with small about 5mm arc cut-out of outer edge 1 driven 2mm again with small arc cut out 6 drive about 2.5mm metal, total thickness about 3.5mm Can anyone advise what sequence should be in there and do the drive plates have any life left in them or is it another circa £100 for a new set!!?? Thanks
There should be 8 x 2mm plane 1x1.5mm dished and 7 friction plates. First 2x2mm Then 1 friction Then 1.5mm dished Then alternately fit remaining friction and plane plates.
