848 Rear Disc 916 Hub

Discussion in 'Technical Help' started by Cranker V2, Jun 9, 2014.

  1. Will a four bolt 848 rear disc fit a 916 hub?
     
    #1 Cranker V2, Jun 9, 2014
  2. it's ok, I know the answer now. 848 rear disc and caper hanger wanted now.
     
    #2 Cranker V2, Jun 9, 2014
  3. Mike, I have a good condition rear disc with the 4 DTC pips on. £50 any good?
     
    #3 deleteduser211220, Jun 10, 2014
  4. 20140610_160027.jpg 20140610_160052.jpg
     
    #4 deleteduser211220, Jun 11, 2014
  5. As the diameter is larger be careful with the caliper to wheel clearance. Some wheels won't clear the caliper.
     
    #5 Danger Mouse, Jun 11, 2014
  6. Been playing about with this myself...

    IMG_0720.JPG

    IMG_0721.JPG
     
    #6 Nelson, Jun 11, 2014
  7. So have I....

    I had to swap the caliper as the std unit wouldn't clear the mag marchesini. It did clear the ali marchesini though.

    2013-12-01 11.16.17.jpg

    2013-12-01 11.16.42.jpg
     
    #7 Danger Mouse, Jun 11, 2014
  8. I think you're ok with the poverty spec wheels...;)
     
    #8 Nelson, Jun 11, 2014
  9. Did you get sorted with a disc?
     
    #9 deleteduser211220, Jun 15, 2014
  10. I'm going to use a bracket for the speed sensor mounted off the caliper mount bolts. Bike Sport Developments supply them, though I will fab my own in the first instance. No need to make any changes to rear disc set up using bracket it seems.
     
    #10 Cranker V2, Jun 15, 2014
  11. I made my own for the Translogic dash, picks up off the four disc bolts;

    [​IMG]
     
    #11 Dukedesmo, Jun 15, 2014
  12. Aye, I am going to machine something similar. :upyeah:
     
    #12 Cranker V2, Jun 15, 2014
  13. It clears the poverty spec marvic magnesiums too :upyeah:
     
    #13 Cranker V2, Jun 15, 2014
  14. But will it be as crafted as my 'custom' spacers... :D
     
    #14 Dukedesmo, Jun 15, 2014
  15. This is a nicely made sensor holder that someone else made on the old forum.

    Speedo sensor translogic.jpg
     
    #15 Red998, Jun 16, 2014
  16. That alloy bracket is the one that Translogic (used to) supply with the dash, it's the same one I'm using on mine.

    I did intend to replace the 2 nuts with an alloy spacer but never quite got round to it.
     
    #16 Dukedesmo, Jun 16, 2014
  17. I 'made' a bracket for my other bike.
    It's bit of bent Ali with two holes in...:)
     
    #17 Nelson, Jun 16, 2014
  18. Interesting - I was going to ask the very same thing. So, I need a caliper hanger from an 848/1*98 and a disc obviously. Just as well I have the cheepo wheels too ;-)
     
    #18 Bullitt, Jun 16, 2014
(You must log in or sign up to post here.)
Do Not Sell My Personal Information