One fitted 1100 Monster saver courtesy of Rally & his bike (UKMonster forum) - a gentleman and a scholar. The 1100's have the aforementioned nubbin, which needs a section cut out of the saver for it to avoid, also a redesigned upper tab (rounded lefthand top with a nick cut out to suit the 1100 cases, looks like a backwards "R" :biggrin: Soopah! The upside is I now have a template to make 1100 savers out of, I have two marked and drilled already in the garage... The bizarre thing being they are a 900/916 etc dry clutch template with a few mods? All the mountings are the same! - and yes - the sprocket cover fits straight over the top no prob... :smile: Many thanks to Rally for his time today, was a job well done! :thumbsup:
Here you go: Ducati M1100 1100 Evo 1100Evo Monster stainless crankcase case saver | eBay Forum Buy-it-now available, please ask! :smile:
Mine's still on the shelf in the garage although I did have a tentative look to check that the mounting holes lined up and I noticed that something was stopping the case saver from going all the way in. I'll make the notch with my small angle-grinder and re-shape the tab with a Dremel. Cheers, Dave.
Cool! I'll get measurements of the distance it needs to be from the tabs, length & depth etc? Difficult to see the nubbin behind the sprocket? Cheers, Darren
Rather Savage chain break on a Hyper/Monster 1100 engine, meaning a new engine needed... DUCATI HYPERMOTARD ENGINE 1100s 2009 1100 Race 09 | eBay Could have been yours, could have been avoided for MUCH less money... Ducati M1100 1100 Evo 1100Evo Monster stainless crankcase case saver | eBay Ducati M1100 1100 Evo 1100Evo Monster Hyper TITANIUM crankcase case saver ! | eBay
