Separate names with a comma.
just added something below the photo
hopefully i have found a few faults after removing the airbox that has solved the problem. the plugs and airbox were dirty due to an oil breather...
Ok thanks, I will use some cleaner in the fuel
recently i unplugged the PC ,but the bike ran worse. same question again, can you recommend a cleaner or just using a dry wire brush
just removed the airbox to check the injectors and found this on the valves. can you recommend a cleaner to use with a small wire brush. .[ATTACH]
i still have the leads,disc and info that came with the pc
the mechanic tried quite a few things today with no success ,but he did mention what you have suggested above. getting the bike back first thing...
all the better for all bike racing viewers, cheers
cheers, thought tnt did moto gp and eurosport/discovery+ did wsb
just got a firestick and i cannot find the wsb from philip isle this weekend. what channels are covering the weekends racing
thanks chris, the mechanic phoned me and said he had done some homework on the issue . so its going back in next week to try and fix the problem
thats whats happening next week
HA HA, spoke to soon. today the bike will not start unless i twist the throttle and it will not idle by itself, i have to hold the rpm at about...
just put the bike in for the belts to be done and i asked the mechanic to put the texa diagnostics on it and it came up as the TPS needing...
welcome to the forum, did the same as you RSVR,s first then ducati,s
forgot to mention the bike has a power commander and has been dynoed. when it is ticking over it will run until 90 then cut out.
installed new crank sensor . the bike is now starting but only when i twist the throttle and hold for about 3-4 seconds. while the bike has been...
tested sensor and i am getting 0.84 using 200k ohms but only at certain terminals on the sensor connector
started the bike and its firing more but then cutting out. i kept doing this and then PK.UP 34.0 appeared, pick-up sensor error. the bike still...
the pump is priming and i have removed it , all the hoses/ connections look ok. got new o-rings fitted to the quick release connectors so i will...
