Separate names with a comma.
Also dont forget to expel the air in the tubes or you will get a lock. slacken the screws in the top nuts and bounce the forks as far as you can...
185cc is correct tube length should be 600mm Forks should be fully extended with the weight of the bike on them ( not the rider) stiction is a...
Have a chat with https://www.allbikeengineering.co.uk/discs.php or fill out a job card for a quote Paddy
The SS can be really picky about mixture screw position so dont think 1.5 turns or 2 turns, think 1.5 or 1.6 turns. :-) Getting the pump volume...
Drop me an email and i will give you an address.
If you want to send the old ones to me i will check them over just out of interest FOC, just the return postage.
40's are not worth refurbing as its cheaper to buy new if you need slides. its different with 32's as you cant buy them new anymore. List on PHM40...
65 is std for an 82 Darmah, i can put a pair in the post if you dont have them. Just seems odd that it ran on 60's before. The usual problem with...
Sorry but going up on the pilots to mask a problem elsewhere is a waste of time. You have a blockage in the idle circuit as thats the only thing...
OK next spray some carb cleaner around the inlet rubber insulator with the engine running and see if the revs pick up.
You have a blockage in the pilot circuit. take the pilot jet out, spray some carb cleaner up the hole from a pressurised can and you should see it...
the original PS12 would have had a shorter nose, opposite end to the banjo bolt. they didnt make this master in a PS16 Whats that one in the box ?...
TBH,you shouldn't be able to tell from the outside , inside is the usual giveaway but even that can be faked. The only real way is historical...
Not really motorcycles anymore, just investors investments. IMHO they are a can of worms, i remember Ian Falloon telling me that most are fake, i...
The darmah SS is an oddity, the engine and frame number dont tell you much except its a Darmah engine and frame. The SSD's were simply SD's pulled...
With that sort of debris in the filter i would check the tank filters on the taps as well, looks like you have some rust going on in the tank.
I get that you balanced the carbs but did you wind the mixture screw out to 3 turns to see if that cured the problem ? If it does its not a...
one other thought thats cheap to try, it may be running weak on the front. Std mixture screw set is 1.5 turn out but try taking it out to 2.5 or 3...
its usually sign of an air leak , check your manifold rubber, maybe spray a little carb cleaner round it with the engine running and see if the...
There is a possibility they may continue... we should know tomorrow, however the reason i said speak to Neil is even if the shop closes he will...
