Separate names with a comma.
Don't know if i am allowed to post this? 900 supersport. Garage clear out parts for sale - red headlight fairing - in grey etch primer ready to...
All fixed - very fast delivery from simply bearings :-) Zero play now!
Got it out without too much bother - spring clip bit fiddly to get out! Bearing is very dirty / rusty - only done 10k miles :-( Top hats in VG...
thanks for info guys - going into garage now to strip out the shock and remove the bearing!
tried searching for previous posts - not a lot! MOT today have got an advisory regards slight play in rear shock bottom bearing on my 93 900 ss....
Stainless with clear covering - very well finished hoses and fittings. Lots of other good makes available! [ATTACH]
My bike has an aftermarket clutch slave cylinder - Jap market "fine feather" !! Looks similar to Oberon. It had the original clutch hose still...
Xerapol acrylic polish / scratch remover. Don't use T Cut ! Too abrasive. I used 3000 grit wet & dry on a few scratches first then Xerapol....
Had to go and buy some milk, so essential journey to shakedown / test my 900 carbie after its winter refurb! Long list of work carried out -...
Agree with the folk who have said don't replace it - will be able to hear the air box more :-)
1993, so foam is pretty old!
The foam stuck underneath my tank has crumbled and started to disintegrate (found lots of bits inside the air box!). It has taken me ages to...
The fuel warning light was on permanently on my 900 ss - seems the sender wires on the older versions (mine is 93) are prone to being bent over...
Thanks for the link - seems we have reached same conclusion , 96T as per standard is the way to go!
I have fitted a standard 15T front & 39T rear sprocket to lower the gearing as recommended to make the bike better at lower speeds. Kit was...
Brilliant guys! Thanks very much for the links
[ATTACH] I am in the process of refurbing my 1993 900 SS - there is evidence of the exhaust cans having lightly rubbed on the swinging arm on both...
Might try Italy as in no rush - mine are showa so screwed on, plus tiny torx grub screw to remove first after I have bought a torx to fit! Made...
Thanks Nasher! Checked their website - one for my 900 ss is £129.00. AM Philpott quoted me £170 to re chrome one stanchion!! :astonished:...
thanks - I am going to try holding fork bottom in vice and using a bar through holes in top of tube to unscrew. Plus lots of heat!
